News Center
/
/
Specification for the use of packaging machines

Specification for the use of packaging machines

(Summary description)1. After installing the equipment, fix the mechanical equipment with expansion bolts, and reliably connect the power plug and gas pipeline. The full-load test run must be accurate before proceeding. 2. Equipment maintenance and management personnel should add lubricating oil to the parts that must be lubricated, such as reducer and rolling bearings. Regularly maintain whether the fasteners of mechanical equipment are loose. 3. The working pressure of the pneumatic valve should be stable, and the gas of the pneumatic valve should be clean and dry. In addition, the customer's pneumatic valve should have a welding fume filter system to ensure that the welding fume is contained in the air compression, thereby promoting the wetting of the cylinder and ensuring the service life of the pneumatic components. 4. Machines and equipment, household appliances, and motors should not be splashed in the room. Wastes such as smoke and particles cannot be added by human factors such as cylinders, buttons, sensors, etc., to avoid damage to mechanical equipment. 5. The working voltage applied by the machine and equipment is 220V, 380V, and the operator must be trained to operate. After the bagging machine is installed at the customer, it is particularly important for the actual operator to correctly operate the machine and the service life of the equipment. Therefore, the actual operator must strictly follow the bagging machine operation manual to use the bagging machine correctly.

Specification for the use of packaging machines

(Summary description)1. After installing the equipment, fix the mechanical equipment with expansion bolts, and reliably connect the power plug and gas pipeline. The full-load test run must be accurate before proceeding.<